Bazz::Murda AU and VST bass/kick synthesizer
Version 1.8.2
Date: 2022-04-30
© DistoCore 2013-2022

Contents:

1. Disclaimer
2. Latest Information
3. System Requirements
4. About
5. Technologies Utilized
6. Frequently Asked Questions (FAQ)

Disclaimer

The DistoCore audio plug-ins are provided to the user 'as is' with no warranty of any kind.
The "DistoCore Team" takes no responsibility for any loss or damage,
which may occur as a result of using the DistoCore audio plug-ins/software.
By using this software you are agreeing to these terms of use.


Latest Information

Version 1.8.2 FREE (2022-04-30):

• Bazz::Murda is now available as VST3 version for both MacOS and Windows
• new hard limiter with controllable threshold level
• phaser tempo-sync. knob allows users to synchronize phaser-rate with host tempo
• new and improved distortion curve processing functions
• improved sample-rate conversion algorithm
• improved noise-gate algorithm
• audio-signal flow optimization and pipeline improvements
• refreshed factory presets
• cosmetic bug fixes
 
Version 1.8.1 FREE (2021-05-05):

• GUI and usability improvements
• drop-down lists for LFO signal mode
• new "Wave-Vibe" oscillator waveform
• fixed programs initialization
• tooltips for all GUI control elements
• new artists distortion curves by I:GOR and Kielce Terror Squad
• performance optimization
• refreshed factory presets
• cosmetic bug fixes
 
Version 1.8.0 FREE (2020-05-07):

• GUI and usability improvements
• drop-down list for waveform, filter, distortion and note-mode selection
• new start phase parameter added to oscillator unit
• new filters added to oscillator unit, now you can filter oscillator signals using low-pass, high-pass and band-pass filter
• LFO can now be applied to control the pan parameter
• new ADSR algorithm with shape, amount and velocity control
• pitch-bend range control
• new "Waveshape" distortion FX mode
• tempo delay spread control for controlling delay offset between the left and right channel
• performance optimization
• refreshed factory presets
• cosmetic bug fixes
 
Version 1.7.2 FREE (2019-08-21):

• special OSC #126 build with pitch-bend range control
 
Version 1.7.1 FREE (2019-05-12):

• fix AU validation by setting Meta Param Flag for LFO frequency and LFO sync. all parameter flags
• processing of MIDI pitch-bend events
• new note mode "KICK HIGH" centered at 52.4 Hz
• improved filter input distortion algorithm
• improved output saturation algorithm
• new waveform visualization mode: "Half" for better output and LFO signals overlay visibility
• new/improved scope tab GUI buttons
• performance optimization
• refreshed factory presets
 
Version 1.7.0 FREE (2019-01-02):

• band-limited wave-table oscillators
• tempo synced LFOs
• new LFO signal modes: 'positive', 'negative', 'absolute' and 'inverted' for different modulations
• tempo delay with amount, feedback and dump controls
• 1/16 major/minor arpeggiator note mode for chiptune sounds
• new powerful distortion engine with distortion curve import/export and different draw&edit options
• new scope tab for visualizing LFO and output signals with zoom and freeze options
• option for sending bass-layer signal to FM modulator
• new build-in user waveforms
• refreshed factory presets
• performance optimization
• cosmetic bug fixes
 
Version 1.6.0 FREE (2017-07-30):

• new dynamic shaper unit (same as in Dirty Sound Destructor [Disto::Fx])
• play button for playing(LMB)/stopping(RMB) a single kick/note
• support of import/export of the VST FXP binary program format files from GUI
• enhanced and improved "Click" knob for coloring bass/kick drum clicks
• improved oscillator waveforms and playback algorithm
• fixed FM modulation start for new note keys
• refreshed factory presets
• synthesis engine optimization
• multiple plugin usage fixed
• cosmetic bug fixes
 
Version 1.5.2 FREE (2016-07-11):

• fix for FL Studio: enable default parameter automation
• drop-down list for factory presets
 
Version 1.5.1 FREE (2016-06-21):

• fix for Ableton: all internal parameter values are normalized
 
Version 1.5.0 FREE (2016-06-19):

• FM carrier frequency modulation
• 2 voices unison
• new hard limiter, pan and dry/wet controls
• new option for adding a click for drum sounds
• new and reworked factory presets
• new "kick/drum" note mode for playing low frequency kicks
• improved filter engine with input drive and transition type selection
• improved distortion engine (same as in Dirty Sound Destructor [Disto::Fx])
• improved ring modulator with different waveforms
• improved pitch envelope with additional pitch down parameter
• improved preset access
• on/off switches for oscillators and all fx units
• cosmetic bug fixes
 
Version 1.4.0 (2015-03-05):

• 64-bit processing for crystal clear bassdrums
• fixed LFOs and tuning/pitching algorithm
• new powerful distortion engine (same as in Dirty Sound Destructor [Disto::Fx])
• on/off switches for oscillators and fx units
• improved ring modulator (removed ugly clicks)
• new and reworked presets
• cosmetic bug fixes
 
Version 1.3.0 (2014-10-19):

• new filter unit including band-pass, band-stop and 12/24 dB HP/LP filters
• improved distortion unit with extra gate/loudness/bypass and new powerful DistoCore presets
• global transpose + base frequency display
• new redesigned GUI with improved knobs/indicators
• reworked presets + new distocore presets dedicated to band-pass filtering
• fixed memory leaks
• fixed a few processing issues
 
Version 1.2.1 (2014-04-15):

• improved note pitch/tune algorithm
• fixed pitch/tune GUI control updates
 
Version 1.2.0 (2013-04-10):

• global saturation
• new distortion presets "Hardcore-Fuzz 3" and "Hardcore-Fuzz 4"
• improved engine
• fixed a few bugs
 
Version 1.1.2 (2013-03-29):

• improved waveform loading
 
Version 1.1.1 (2013-03-21):

• fixed crash on LP filter algo
 
Version 1.1.0 (2013-03-16):

• volume and filter envelope
• reworked and improved distortion unit
• distortion curve plot
• new phaser FX
• new bass-layer, which adds an unprocessed clean sine-wave bassdrum to final output
• fixed GUI control updates
• 64-bit Win version
 
Version 1.0.0:

• initial version
• 45 built-in presets
• fixed MIDI events dispatching
• fixed dirty filter states
• added FX section bypassing
 
Version 0.9.5 Beta:

• beta version
• 3 oscillators
• ring modulator
• 12dB RBJ filters
• powerful distortion unit
• supported waveform formats: RAW 32-bit IEEE, WAVE (16-bit) mono

Testers:
Buła, I:Gor, The Reaper (Atomic Annihilation Recordings), Tripped, Dave Igneon
 


System Requirements:

WINDOWS PC:
Windows 7, Windows 8 or Windows 10 (latest Service Pack, 32/64-bit) + modern Intel or AMD CPU
Bazz::Murda is provided as 32-bit and 64-bit DLL versions.

MAC OSX:
OS X 10.9 or later + modern CPU (Sandy Bridge or newer recommended)
Bazz::Murda is provided only as 64-bit bundle version.

Bazz::Murda is not a standalone product, it requires a VST2 or an AU compatible host software.
It is compatible with nearly all Digital Audio Workstations (DAWs).


About

DistoCore team:
Buła: C++ Code, GFX, Concept & Idea
I:Gor: Concept & Idea

Contact email:
distocore@gmail.com

KVR Audio:
KVR DistoCore developer

Facebook:
DistoCore on Facebook



Technologies Utilized

DistoCore audio plug-ins "Bazz::Murda" and "Disto::FX" use the following technologies, SDKs and frameworks:

· VST and VST3 are technologies and trademarks of Steinberg Media Technologies GmbH
· Audio Unit is a technology and trademark of Apple Computers, Inc.
· WDL-OL: Enhanced version of Cockos IPlug/WDL by Oli Larkin
· C++ DSP library written by Vinnie Falco.


Frequently Asked Questions (FAQ):

1) How to install this audio plug-in?

Windows Installer:
Execute the windows executable and follow the wizard.
The default install directory is:
"C:\Program Files\Common Files\VST3" as recommended by Steinberg.

Windows ZIP Package:
Simply unzip and copy the content to your VSTPlugIns host's directory.

MAC OSX PKG Installer:
Double-click the package and follow the wizard to install the Audio-Unit, VST and VST3 files.

MAC OSX Audio Unit ZIP Package:
Simply unzip and copy the Audio-Unit AU [*.component] content to:
/Library/Audio/Plug-Ins/Components
or
~/Library/Audio/Plug-Ins/Components

MAC OSX VST ZIP Package:
Simply unzip and copy the VST [*.vst] content to:
/Library/Audio/Plug-Ins/VST
or
~/Library/Audio/Plug-Ins/VST

MAC OSX VST3 ZIP Package:
Simply unzip and copy the VST3 [*.vst3] content to:
/Library/Audio/Plug-Ins/VST3
or
~/Library/Audio/Plug-Ins/VST3


2) Which note to play to get the best effect?

Bass drum base frequencies between 30 - 65 Hz sound low and good,
check the note's frequency display to make sure you play the proper note.
If you are not sure activate one of the fix frequency "kick/drum" note modes using the "Note-Mode" drop-down list on the GUI.
The note F1 corresponds to the frequency of 43.65 Hz, which will give you a nice, low and powerful bass drum sound.
You will find more detailed information under the following link:
Table of Frequencies of Musical Notes - Physics