preset and distortion drop-down lists selection is now devided into corresponding sub-menus
new "Neo-Fuzz" distortion curve
improved audio processing pipeline
improved filter band-width parameter control
fixed stereo panning for input signals
refreshed factory presets
cosmetic bug fixes
Plug-In Tab Screenshot:
Disto::Fx FREE Version 1.7.1 (2022-09-23):
GUI and usability improvements
preset and distortion drop-down lists selection is now devided into corresponding sub-menus
improved audio processing pipeline
fixed stereo panning for input signals
refreshed factory presets
cosmetic bug fixes
Plug-In Tab Screenshot:
DistoFonic Version 1.0 (2022-07-31):
64-bit audio processing and distortion engine
Distortion Unit with 79 distortion curves, 3 different operating modes and Bit Crusher/Sample Rate Converter/Gate controls
Dynamic Waveshaper with 9 different Shape Forms + Shape Inverter + 4 Dynamic Shaping Modes + Shape-Width Control Parameter
4 Band Equalizer for Sub- and Disto-Band
Sub-/Disto-Band Processor with flexible band split frequencies
Filter Unit with 27 different filters and controllable input drive, cutoff, resonance, transition speed and left/right filter type balance
Input Unit lets you control the input volume, saturation and DC offset
Output Unit with pan, saturation, dry/wet balance, 3 modes clipper/limiter, output volume and oversampling mode control
Plug-In Tab Screenshot:
Bazz::Murda Version 1.8.2 PRO (2022-06-03):
Bazz::Murda is now available as VST3 version for both MacOS and Windows
new clipper/limiter with controllable threshold level and operating modes: off/soft/standard/hard
phaser tempo-sync. knob allows users to synchronize phaser-rate with host tempo
new and improved distortion curve processing functions for curve filtering and quantization
improved sample-rate conversion algorithm
improved noise-gate algorithm
improved click texture syntesis
audio-signal flow optimization and pipeline improvements
preset drop-down list selection is now devided into corresponding sub-menus
refreshed factory presets
cosmetic bug fixes
Synth-Tab Screenshot:
Bazz::Murda Version 1.8.2 FREE (2022-05-06):
Bazz::Murda is now available as VST3 version for both MacOS and Windows
new hard limiter with controllable threshold level
phaser tempo-sync. knob allows users to synchronize phaser-rate with host tempo
new and improved distortion curve processing functions
improved sample-rate conversion algorithm
improved noise-gate algorithm
audio-signal flow optimization and pipeline improvements
refreshed factory presets
cosmetic bug fixes
Disto::Fx PRO Version 1.7.0 (2022-02-12):
Disto::FX is now available as VST3 version for both MacOS and Windows
new clipper/limiter with controllable threshold level and operating modes: off/soft/standard/hard
phaser tempo-sync. knob allows users to synchronize phaser-rate with host tempo
new contrast-rich displays for user-friendly distortion curve and audio wave-form vizualisation
new and improved distortion curve processing functions for curve filtering and quantization
improved noise-gate algorithm
audio-signal flow optimization and pipeline improvements
refreshed factory presets
cosmetic bug fixes
Fx-Tab Screenshot:
Disto::Fx FREE Version 1.7.0 (2022-02-04):
Disto::FX is now available as VST3 version for both MacOS and Windows
new hard limiter with controllable threshold level
phaser tempo-sync. knob allows users to synchronize phaser-rate with host tempo
new contrast-rich displays for user-friendly distortion curve and audio wave-form vizualisation
Low-Pass/Hi-Pass filter frequency display
improved distortion curve processing functions
improved noise-gate algorithm
audio-signal flow optimization and pipeline improvements
refreshed factory presets
cosmetic bug fixes
Fx-Tab Screenshot:
Disto::Fx FREE/PRO Version 1.6.2 (2021-10-23):
new distortion curve and factory preset by Kielce Terror Squad
fixed programs initialization
cosmetic bug fixes
Bazz::Murda Version 1.8.1 FREE (2021-05-14):
GUI and usability improvements
drop-down lists for LFO signal mode
new "Wave-Vibe" oscillator waveform
fixed programs initialization
tooltips for all GUI control elements
new artists distortion curves by I:GOR and Kielce Terror Squad
performance optimization
refreshed factory presets
cosmetic bug fixes
Disto::Fx FREE/PRO Version 1.6.1 (2021-01-07):
fixed distortion curves quantization noise
fixed distortion polarization option
added improved filter unit input drive algorithm
Disto::Fx PRO Version 1.6.0 (2020-11-26):
GUI and usability improvements
drop-down list for filter and distortion selection
tooltips for all GUI control elements
new "waveshape" distortion FX mode
new "PRE" and "POST" distortion modes for controlling the FX chain
filter slope control (12dB/24dB) for Low-Pass/Hi-Pass unit
HQ bessel filter option with 2 operating modes for final processing
added new distortion curves
added new filters
improved in/out saturation algorithms
performance optimization
refreshed factory presets
cosmetic bug fixes
Fx-Tab Screenshot:
Disto::Fx FREE Version 1.6.0 (2020-11-13):
GUI and usability improvements
drop-down list for filter and distortion selection
tooltips for all GUI control elements
new "waveshape" distortion FX mode
added new distortion curves
added new filters
improved in/out saturation algorithms
performance optimization
refreshed factory presets
cosmetic bug fixes
Fx-Tab Screenshot:
DistoCore's full support for the STOP COVID-19 action and the #STAYHOME call continues:
Bazz::Murda Version 1.8.0 PRO (2020-05-08):
GUI and usability improvements
drop-down list for waveform, filter, distortion and note-mode selection
new start phase parameter added to oscillator unit
new filters added to oscillator unit, now you can filter oscillator signals using 15 different low-pass, high-pass, band-pass and band-stop filters
LFO can now be applied to control the pan parameter
oscillator 1 FM function amount control for using oscillator 1 as FM modulator for the other oscillators
new ADSR algorithm with shape, amount and velocity control
updated sub-oscillator unit with 5 diffrent waveforms
pitch-bend range control
new "waveshape" distortion FX mode
new "PRE" and "POST" distortion modes for controlling the FX chain
Filter slope control (12dB/24dB) for Low-Pass/Hi-Pass unit
tempo delay spread control for controlling delay offset between the left and right channel
HQ bessel filter option for final processing
performance optimization
refreshed factory presets
Synth-Tab Screenshot:
A picture is worth a thousand words.
Here is a brief and concise review by Crime1minister
Check also his preset pack for Bazz::Murda 1.8 FREE in the download section.
DistoCore's full support for the STOP COVID-19 action and the #STAYHOME call:
Bazz::Murda Version 1.8.0 FREE (2020-04-06):
GUI and usability improvements
drop-down list for waveform, filter, distortion and note-mode selection
new start phase parameter added to oscillator unit
new filters added to oscillator unit, now you can filter oscillator signals using low-pass, high-pass and band-pass filter
LFO can now be applied to control the pan parameter
new ADSR algorithm with shape, amount and velocity control
pitch-bend range control
new "waveshape" distortion FX mode
tempo delay spread control for controlling delay offset between the left and right channel
1. Mr. Karolus
2. The Exponent
3. Jasinski
4. Morphed Dreams
5. J.Ruegg & Carl_saved
...and all musicians, who participated on the challenge.
Here is our SoundCloud playlist with all 37 tracks made with Bazz::Murda by DistoCore:
Finally our Bazz::Murda synth was selected for the KVR OSC #126 challenge
To keep a long story short:
"It's a friendly music competition where you can win cool prizes but most importantly,
meet amazing musicians, and learn a lot about mixing, sound design, and more!"
The challenge is about one synth Bazz::Murda, one month, one track.
That's hopefully good news for your weekend and the month to go!
If you guys have time, join the competition and show the world what hardcore sounds like!
Last but not least we are adding the following DistoCore prizes to the prize list:
Bazz::Murda PRO + Disto::FX PRO bundle (the winner takes it all)
Bazz::Murda PRO
Disto::FX PRO
Start the challenge now!
Bazz::Murda Version 1.7.1 FREE (2019-05-12):
fix AU validation by setting Meta Param Flag for LFO frequency and LFO sync. all parameter flags
processing of MIDI pitch-bend events
new note mode "KICK HIGH" centered at 52.4 Hz
improved filter input distortion algorithm
improved output saturation algorithm
new waveform visualization mode: "half" for better output and LFO signals overlay visibility
new/improved scope tab GUI buttons
performance optimization
refreshed factory presets
This track was produced by the Unknown Challenger for the KVR One Synth Challenge #121/10 Year Anniversary.
The challenge, as the name implies, is to make a track just with one virtual synthesizer for all sounds, including percussion.
The "Blaze Your Own Trail" track was completely made with Bazz::Murda 1.7 FREE.
Unknown Challenger used 15 instances of our synthesizer for this production.
This track demonstrates the wide variety of sounds, which can be generated by the DistoCore Bazz::Murda.
Congratulation! Great idea, production and sound design :)
Bazz::Murda Version 1.7.0 PRO (2019-01-24):
band-limited wave-table oscillators
tempo synced LFOs
new LFO signal modes: 'positive', 'negative', 'absolute' and 'inverted' for different modulations
tempo delay with amount, feedback and dump controls
8 new major/minor note modes for chiptune sounds
new powerful distortion engine with distortion curve import/export and different draw&edit options
new scope tab for visualizing LFO and output signals with zoom and freeze options
option for sending bass-layer signal to FM modulator
new build-in user waveforms
refreshed factory presets
performance optimization
cosmetic bug fixes
PRO Version Synth-Tab Screenshot:
Bazz::Murda Version 1.7.0 FREE (2019-01-06):
band-limited wave-table oscillators
tempo synced LFOs
new LFO signal modes: 'positive', 'negative', 'absolute' and 'inverted' for different modulations
tempo delay with amount, feedback and dump controls
1/16 major/minor arpeggiator note mode for chiptune sounds
new powerful distortion engine with distortion curve import/export and different draw&edit options
new scope tab for visualizing LFO and output signals with zoom and freeze options
option for sending bass-layer signal to FM modulator
new build-in user waveforms
refreshed factory presets
performance optimization
cosmetic bug fixes
Synth-Tab Screenshot:
Disto::Fx PRO Version 1.5.0 (2018-05-20):
new distortion curve editor for designing custom distortion-shapes
distortion curve processing options allows users normalizing, smoothing, sharpening curve and adding noise to custom curve
new CSV/WAV file import/export for custom distortion-shapes
new polarisation option for distortion and dynamic shaper unit
new scope tab for visualizing input/output signal with zoom and freeze options
stereo/mono mix or mono channel input mode switch
improved ring modulator with 7 different anti-alias waveforms
distortion engine optimization
refreshed factory presets
GUI redesign
cosmetic bug fixes
Fx-Tab Screenshot:
Disto::Fx FREE Version 1.5.0 (2018-05-04):
new distortion curve editor for designing custom distortion-shapes
distortion curve processing options allows users restoring, smoothing curve and zero crossings and adding noise to custom curve
new CSV import/export for custom distortion-shapes
new polarisation option for dynamic shaper unit
new scope tab for visualizing input/output signal with zoom and freeze options
stereo/mono mix or mono channel input mode switch
improved ring modulator with 5 different anti-alias waveforms
distortion engine optimization
refreshed factory presets
GUI redesign
cosmetic bug fixes
Fx-Tab Screenshot:
Bazz::Murda Version 1.6.0 PRO (2017-08-25):
new dynamic shaper unit (same as in Dirty Sound Destructor [Disto::Fx])
play button for playing(LMB)/stopping(RMB) a single kick/note
support of import/export of the VST FXP binary program format files from GUI
enhanced and improved "click" knob for coloring bass/kick drum clicks
improved oscillator waveforms and playback algorithm
improved unison unit
fixed FM modulation start for new note keys
refreshed factory presets
synthesis engine optimization
multiple plugin usage fixed
cosmetic bug fixes
Synth-Tab Screenshot:
Bazz::Murda Version 1.6.0 FREE (2017-07-30):
new dynamic shaper unit (same as in Dirty Sound Destructor [Disto::Fx])
play button for playing(LMB)/stopping(RMB) a single kick/note
support of import/export of the VST FXP binary program format files from GUI
enhanced and improved "click" knob for coloring bass/kick drum clicks
improved oscillator waveforms and playback algorithm
fixed FM modulation start for new note keys
refreshed factory presets
synthesis engine optimization
multiple plugin usage fixed
cosmetic bug fixes
Synth-Tab Screenshot:
"Journey to audio synthesis and processing" PDF version of Buła's last presentation (05.04.2017):
